![]() (Don't worry there is ample to do this, so you don't need Superman speed). Once your custom IPSW file has been created, Seas0nPass will ask you to connect the Apple TV to your computer via a micro-USB cable and use the remote to put it into DFU mode by holding MENU. Once the you receive the success message shown below, the USB cable should be removed and HDMI cable connected before the light on the front of the Apple TV stops flashing. Once complete, remove the USB cable and connect the HDMI cable. Step 3: Seas0nPass will complete the tethered boot automatically. Once both are connected hold both the 'MENU' and 'PLAY/PAUSE' buttons for 7 seven seconds. Wait for the rapid flashing light then connect the power cable. Step 2: When prompted, connect the Apple TV to your computer via USB. Step 1: Open Seas0nPass and select the 'Boot Tethered' option. ![]() Note 2: The Apple TV MUST be disconnected from the computer (for at least a brief moment) after restoring for the tethered boot process below to work properly. This means the Apple TV must be connected to a computer for a brief moment during startup. Some Apple TV software versions require a tethered boot. Note: To confirm the jailbreak was successful a (temporary) red FC logo will appear in place of the Settings icon - as shown below. We make sure that we do not have any iPhone, iPod or iPad connected to our computer. Step 5: Seas0nPass will complete the restore automatically, and confirm when complete. Step 4: The latest Apple TV software will be downloaded and used to create a custom 'jailbroken' software file. Connect your Apple TV to your Mac or PC with the micro USB cable. The older, white (plastic) remotes will not work. To find which software your Apple TV is running, Go to Settings > General > About. Note: This step will require the silver (aluminum) Apple TV remote that was included with the ATV2. Once the light on the front of the Apple TV begins to flash rapidly, point the remote at the Apple TV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds. Step 3: When prompted, connect your Apple TV to your Mac/PC using a micro-USB cable (leave power cable disconnected). Step 2: Select the 'Create IPSW' button to start the jailbreak process. Step 1: Unzip the 'Seas0nPass.zip' file and launch Seas0nPass. Using Seas0nPass to jailbreak the Apple TV Disconnect any iPods, iPhones, and iPads from your computer.Latest version of Seas0nPass (use links above).Update: aTV Flash (black) is now available on GitHub! To support future development, please think about picking up a copy of aTV Flash (black) - it's really awesome! For the newer 4th gen (and later) Apple TV download Infuse from the App Store!Įven though Seas0nPass is provided at no cost, countless hours have gone into making it the simplest and most reliable jailbreak tool for the Apple TV. Older Apple TV versions can be used with saved firmware signatures. Seas0nPass supports the 2nd gen Apple TV running version 5.3.Ī tethered version of 6.2.1 can be installed by right-clicking the 'Create IPSW' button. Seas0nPass provides an UNTETHERED jailbreak of the 2nd gen Apple TV running the latest 5.0.2 (iOS 5.1.1 - 9B830) software that was released on June 6th, 2012. Some features may no longer be working, and support is no longer available.
0 Comments
Leave a Reply. |